BTZS.org >> Forums home page
 
 Practical BTZS
 The BTZS System in Practice

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 131 to 140 of 387 (Total: 387) First | Prev | Next | Last
Subject 
Author 
Date 
Re: BTZS Exposure and Development Question 
Phil Davis  12:01 20 Oct 06 
Re: BTZS Exposure and Development Question 
Paul  6:07 21 Oct 06 
"The shot of a lifetime" 
Miles  20:21 18 Oct 06 
densitometer readings 
chrisf  2:46 13 Oct 06 
Re: densitometer readings 
Jorge Gasteazoro.   8:24 13 Oct 06 
Re: densitometer readings 
Steve Nicholls  18:14 14 Oct 06 
USA trip 
Steve Nicholls  5:25 7 Oct 06 
streaks 
Shannon Stoney  13:07 5 Oct 06 
Re: streaks 
Jorge Gasteazoro.   13:40 5 Oct 06 
You dont shake, you roll......

You should put the tubes in a water bath and roll them, I was able to roll 6 8x10 tubes in a 20x24 tray with water. Or you can just put them on a table and roll them if you dont want to use a water bath and you have calibrated for room temp.
 
Re: streaks 
Miles  18:01 6 Oct 06 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002