BTZS.org >> Forums home page
 
 Practical BTZS
 The BTZS System in Practice

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 81 to 90 of 387 (Total: 387) First | Prev | Next | Last
Subject 
Author 
Date 
Re: up and running 
Jorge Gasteazoro.   0:26 27 Mar 07 
Re: up and running 
Miles  16:48 27 Mar 07 
Re: up and running 
Jorge Gasteazoro.   0:03 29 Mar 07 
Re: up and running 
miles  15:37 29 Mar 07 
BTZS and platinum printing 
Miles  19:03 24 Feb 07 
Re: BTZS and platinum printing 
Jorge Gasteazoro.   16:37 25 Feb 07 
Depending on the color you want on the print the Na2 method is good or not. The Na2 method produces a more neutral tone as opposed to the brownish warm tones that the more traiditonal contrast control methods yield. The advantage of the Na2 method is that you can print negatives that dont have too much contrast.

If you plan to use a stainning developer you will need a densitometer that reads UV light transmission, the regular densitometers do not work for this.

I use pyrocat HD at 2:2:100 and my times are from 3 min to 16 minutes, I can send you my winplotter curves if you want to use them while you get yours dialed in. I guess you should do the same for Pyrocat MC.

Congratulations on your NuArc...


 
Re: BTZS and platinum printing 
Miles  19:51 25 Feb 07 
Re: BTZS and platinum printing 
Jorge Gasteazoro.   21:50 25 Feb 07 
Re: BTZS and platinum printing 
Miles  4:41 26 Feb 07 
Re: BTZS and platinum printing 
Miles  18:30 26 Feb 07 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002