BTZS.org >> Forums home page
 
 Practical BTZS
 The BTZS System in Practice

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 91 to 100 of 387 (Total: 387) First | Prev | Next | Last
Subject 
Author 
Date 
Re: BTZS and platinum printing 
Miles  18:32 27 Feb 07 
Re: BTZS and platinum printing 
Steve Nicholls  4:42 28 Feb 07 
Re: BTZS and platinum printing 
Miles  5:02 28 Feb 07 
First Results 
Barry Wilkinson  4:06 23 Feb 07 
Sorry this is a little long...

Well, I have exposed many sheets of film. I have tested with two light sources for exposure. My enlarger and a sensitometer.

My enlarger seems repeatable and is what I would prefer to use as its easy to adjust the EV value. Not very easy with the sensitometer.

My curves are somewhat 'lumpy' using the enlarger. The sensitometer curves are much smoother. I guess this is related to the light wavelength in the enlarger (Tungsten)?

I closed in on EV 3.4 with the enlarger which gave my psp point close to 2.4 with Delta 100 in D76 at 1+1.

I have just done a five sheet test with Acros 100 in Fotospeed FD10 at 1+9. The curves are the familiar slightly 'lumpy' shape. However the EFG/SBR chart puzzles me. Moving from a SBR of 4 to 10, the film speed increases initially, then decreases, then increases again? Is this possible?

I assume this is mainly due to the 'lumpy' curves so I may have to return to the sensitometer? Any advice welcomed.

Barry
 
Re: First Results 
Miles  16:59 23 Feb 07 
Re: First Results 
Barry Wilkinson  9:37 25 Feb 07 
Re: First Results 
Miles  13:54 25 Feb 07 
Re: First Results 
Steve Nicholls  18:30 25 Feb 07 
Re: First Results 
Barry Wilkinson  1:58 26 Feb 07 
BTZS and PMK 
Steve Nicholls  16:52 17 Feb 07 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002