|
|
 | | Author | |
|
| | Date | |
|
|
|
|
Mike Scarpitti |
17:59 27 Feb 06 |
|
|
Miles |
13:54 6 Jul 03 |
  |
I finally run my first film test in my new darkroom I used Delta400/xtol 1+1 @ 72F. this is my 1st use of Delta 400 and what I noticed was that the b+f seems to be substantial and I had a time deciding a good starting point for the test exposure. None the less I did the test using the btzs tubes and a mantis densitometer. I used the winplotter program. According to the charts I get an effective film speed for Delta400/xtol 1+1 combo of 600 to 900 for a Gradient of 0.4 to 0.9. Is this possible? Well I just loaded the film data into my Palm tungsten/t and 2 4X5 film holders and I am heading out the backdoor to see if this "increase" in speed is real. What errors on my part might push the film speed spuriously up?
|
|
|
|
|
|
|
|
|
Miles |
15:11 6 Jul 03 |
|
|
Phil |
17:35 6 Jul 03 |
|
|
Miles |
19:25 8 Jul 03 |
|
|
Abel Sykes |
20:01 5 Jul 03 |
|
|
Phil |
12:36 6 Jul 03 |
|
|
Abel Sykes |
12:44 6 Jul 03 |
|
|
phil sweeney |
5:26 5 Jul 03 |
|
|
Phil |
6:56 5 Jul 03 |
|
