BTZS.org >> Forums home page
 
 Film & Paper Testing
 Film & Paper Testing Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 561 to 570 of 653 (Total: 653) First | Prev | Next | Last
Subject 
Author 
Date 
Re: The ISO triangle... 
Phil  11:30 10 Mar 03 
Jorge --

Establish the ISO speed point with the standard triangle. Its only purpose is to provide a reference for calculating the EFS values of the rest of the family curves. If all you need are the appropriate G-bars for palladium negs you calculate them by dividing your chosen ES by the SBR. It's probably a good idea to increase the ES a little to compensate for probable flare effects, so, for example, you might use 1.95 instead of 1.8 to begin with. Then, again for example, if you encounter a subject whose range is 8 stops (2.4), the appropriate G-bar is 1.95/2.4=0.81.

You'll need fairly unusual materials' combinations to deal with normal or low-contrast subjects; for example, a 6-stop subject will need G-bar=1.08. Very few popular materials can provide that kind of contrast.

Modify your arbitrary flare compensation as necessary if you find that you're consistently over- or under-developing.

 
Re: The ISO triangle... 
Jorge Gasteazoro  21:17 10 Mar 03 
Re: The ISO triangle... 
Phil  11:43 11 Mar 03 
Re: The ISO triangle... 
Jorge Gasteazoro  13:52 11 Mar 03 
Re: The ISO triangle... 
Phil  18:49 11 Mar 03 
Efke 100 PL testing 
Ralph Wood  12:17 11 Feb 03 
Re: Efke 100 PL testing 
Phil  14:46 11 Feb 03 
4th Edition of book: Figures 4-16 & 4-17 
Rich Shepard  9:40 23 Jan 03 
Re: 4th Edition of book: Figures 4-16 & 4-17 
Phil  10:45 23 Jan 03 
Re: 4th Edition of book: Figures 4-16 & 4-17 
Rich Shepard  11:05 23 Jan 03 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002