BTZS.org >> Forums home page
 
 Plotter
 Plotter for Window Software Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 161 to 170 of 215 (Total: 215) First | Prev | Next | Last
Subject 
Author 
Date 
Plotter's matcher 
Robert S. Sfeir  4:57 2 Dec 03 
Re: Plotter's matcher 
Phil Davis  7:17 2 Dec 03 
Speed Point in Pt/Pd Printing 
Sandy King  9:49 8 Nov 03 
Re: Speed Point in Pt/Pd Printing 
Phil Davis  19:24 8 Nov 03 
Re: Speed Point in Pt/Pd Printing 
Jorge Gasteazoro  16:11 10 Nov 03 
Re: Speed Point in Pt/Pd Printing 
Sandy King  17:22 10 Nov 03 
Re: Speed Point in Pt/Pd Printing 
Jorge Gasteazoro  2:38 11 Nov 03 
G-bar or SBR: Smooth or Unedited Curves 
Michael Keslin  12:08 8 Aug 03 
I have just finished a film test using the new Tmax 100 5x7 in BTZS tubes with Tmax RS 1+4 @ 70 degrees. The frist negative I evaluated had a G-bar of .77 and an SBR of 6.3.
My paper has an ES of 1.4. If I use the G-bar chart my development time is 11:30 min using both the unedited and the smoothed curves. If I use the SBR curve the development time is 10:10 for the unedited curve and 10:30 for the smoothed curve. Why are the times different? Is it more accurate to use the smoothed or the unsmoothed curves?
Thank you,
Michael Keslin
 
Re: G-bar or SBR: Smooth or Unedited Curves 
Phil  16:40 8 Aug 03 
Smoothing the Curves 
Sandy King  12:10 17 May 03 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002