BTZS.org >> Forums home page
 
 Film & Paper Testing
 Film & Paper Testing Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 211 to 220 of 653 (Total: 653) First | Prev | Next | Last
Subject 
Author 
Date 
Re: Cold light head 
Mike Donnelly  5:47 19 Aug 06 
Test EV 
Jerry Cunningham  20:26 14 Aug 06 
Re: Test EV 
Steve Nicholls  23:35 14 Aug 06 
Re: Test EV 
Steve Nicholls  23:41 14 Aug 06 
Should be "that can be anywhere from .9 to 1.5 or higher."


By the way the ES figure you enter is usually the one you found for about Grade 2. It can be for any grade of paper you choose but the grade 2 value is nice and central.

With the paper I use grade 2 value is 1.13 + any flare factor I enter in the ExpoDev.

Sorry for any confusion.
 
Re: Test EV 
Miles  16:21 17 Aug 06 
Re: Test EV 
Steve Nicholls  18:07 17 Aug 06 
Re: Test EV 
Miles  14:38 18 Aug 06 
Re: Test EV 
Jerry Cunningham  21:39 15 Aug 06 
all better! 
Miles  14:30 13 Aug 06 
Re: all better! 
Steve Nicholls  16:17 13 Aug 06 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002