BTZS.org >> Forums home page
 
 General Discussions
 General Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 61 to 70 of 316 (Total: 316) First | Prev | Next | Last
Subject 
Author 
Date 
Re: Using a flash for testing.  
John Hannon  13:16 8 Nov 07 
Re: Using a flash for testing.  
Jorge Gasteazoro.   19:05 8 Nov 07 
Re: Using a flash for testing.  
Ben Wilbur  15:13 8 Nov 07 
Re: Using a flash for testing.  
Don Bryant  19:22 25 Dec 07 
Re: Using a flash for testing.  
Jorge Gasteazoro.   20:19 25 Dec 07 
Re: Using a flash for testing.  
Don Bryant  16:15 27 Dec 07 
I see no reason why the flash output couldn't be attenuated to a prover EV. My concern is how repeatable would the exposure be. Also the physical configuration of the flash relative tp the film.

What I sort of envision is having a box like setup where the flash is mounted to one side of the box, the interior being painted white and the light being diffued. The step tablet would be mounted on a sheet of glass on top of the box and the film emulsion placed against the step tablet.

Thoughts anyone?

 
Re: Using a flash for testing.  
Barry Wilkinson  3:03 28 Dec 07 
Re: Using a flash for testing.  
Steve Nicholls  15:59 28 Dec 07 
Re: Using a flash for testing.  
Barry Wilkinson  2:11 29 Dec 07 
Re: Using a flash for testing.  
Steve Nicholls  2:49 29 Dec 07 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002