BTZS.org >> Forums home page
 
 General Discussions
 General Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 71 to 80 of 316 (Total: 316) First | Prev | Next | Last
Subject 
Author 
Date 
Re: Using a flash for testing.  
Jorge Gasteazoro.   14:10 29 Dec 07 
Re: Using a flash for testing.  
Steve Nicholls  23:51 29 Dec 07 
Re: Using a flash for testing.  
John Hannon  8:26 1 Jan 08 
Re: Using a flash for testing.  
Philippe Bedfert  5:04 8 Nov 07 
film development problems 
Michael Finger  17:31 26 Oct 07 
Re: film development problems 
Steve Nicholls  18:13 26 Oct 07 
Re: film development problems 
Miles Nelson, M.D.  17:53 4 Nov 07 
film development problems 
Michael Finger  19:35 8 Oct 07 
Re: film development problems 
Steve Nicholls  0:52 9 Oct 07 
Just a couple of questione -- Have you tried putting the film in the tubes upside down to see if the scratches are affected? Also which film are you using? Th e only time I ever got any scratching was by interleaving film. I now use a rack that sits in a deep tank with the film in it and when it is fixed that rack with negs is transferred to the wash.
 
Re: film development problems 
Michael Finger  7:17 9 Oct 07 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002