BTZS.org >> Forums home page
 
 Film & Paper Testing
 Film & Paper Testing Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 341 to 350 of 653 (Total: 653) First | Prev | Next | Last
Subject 
Author 
Date 
Re: Film/developer combination for PRSP 
Louie Pasto  19:59 18 Jan 06 
Re: Film/developer combination for PRSP 
Phil Davis  10:55 19 Jan 06 
Re: Film/developer combination for PRSP 
Louie Pasto  11:24 19 Jan 06 
Developer dilution? 
Steve Nicholls  4:47 14 Dec 05 
Re: Developer dilution? 
Phil Davis  11:56 14 Dec 05 
Underdeveloped 
Steve Nicholls  2:16 5 Dec 05 
Re: Underdeveloped 
Steve Nicholls  14:55 5 Dec 05 
Re: Underdeveloped 
Phil Davis  17:05 5 Dec 05 
Re: Underdeveloped 
Steve Nicholls  18:20 5 Dec 05 
I have to confess that I did take an educated guess. My first guess was in the wrong direction so I shot one more piece of film in the opposite direction and arrived at the figure. By going through the book I was roughly able to determine what I needed to do. Because of all the material in the book I could see how a different paper figure related to the film. Even though I was not corrrect the first time the system is very logical and my second attempt placed me very close. I definately need to get the Power Daial made or invest in software. I don't mind the manual calculations but I am lazy.
 
Re: Underdeveloped Problem solved 
Steve Nicholls  16:21 6 Dec 05 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002