BTZS.org >> Forums home page
 
 Film & Paper Testing
 Film & Paper Testing Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 51 to 60 of 653 (Total: 653) First | Prev | Next | Last
Subject 
Author 
Date 
Entering Data for a 31 step wedge 
Dr. Elliot Puritz  17:26 22 Dec 09 
Paper ES Testing 
Ben Wilbur  8:43 1 Oct 09 
xdf Files for PyroCat and Ilford FP4 Plus and HP5 Films? 
Bill Eisele  13:27 23 Aug 09 
Re: xdf Files for PyroCat and Ilford FP4 Plus and HP5 Films? 
Steve Nicholls  1:09 28 Aug 09 
Re: xdf Files for PyroCat and Ilford FP4 Plus and HP5 Films? 
Bill Eisele  20:24 28 Aug 09 
Re: xdf Files for PyroCat and Ilford FP4 Plus and HP5 Films? 
Steve Nicholls  7:29 23 Sep 09 
Re: xdf Files for PyroCat and Ilford FP4 Plus and HP5 Films? 
Bill Eisele  12:33 24 Sep 09 
TMX temperature control 
Nick Stanislo  14:21 8 Mar 09 
Re: TMX temperature control 
Ben Wilbur  9:08 9 Mar 09 
Nick: I'm not sure how others monitor the T, but in Phil's earlier publications, he used a large water bath,with all the tubes in at once. He then pulled them out as needed.
Presumably, this large "heat sink" never changed Temp.
significanly. Now if one is developing films one at a time, then good/constant T control is needed. Not sure this answers your Q(s), but perhaps other BTZS users will
have more input.
 
Re: TMX temperature control 
Steve Nicholls  5:31 15 Mar 09 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002