BTZS.org >> Forums home page
 
 Film & Paper Testing
 Film & Paper Testing Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 51 to 60 of 653 (Total: 653) First | Prev | Next | Last
Subject 
Author 
Date 
Entering Data for a 31 step wedge 
Dr. Elliot Puritz  17:26 22 Dec 09 
Paper ES Testing 
Ben Wilbur  8:43 1 Oct 09 
BTZS: Dr. Elliot Puritz, Steve Nicholls and I have been
kicking around issues with paper ES test data. The ANSI density range for a G2 grade paper is .95 to 1.15. My tests with Ilford MG,VC,IV paper placed the EV, in agreement with Ilford's data sheet, at 1.0 or 100. This at the low end of the G2 range. We want to be at the high end of the range to give more "wiggle room" in printing.
Setting the paper ES at 1.15-1.2 does that while keeping the G2 grade.
 
xdf Files for PyroCat and Ilford FP4 Plus and HP5 Films? 
Bill Eisele  13:27 23 Aug 09 
Re: xdf Files for PyroCat and Ilford FP4 Plus and HP5 Films? 
Steve Nicholls  1:09 28 Aug 09 
Re: xdf Files for PyroCat and Ilford FP4 Plus and HP5 Films? 
Bill Eisele  20:24 28 Aug 09 
Re: xdf Files for PyroCat and Ilford FP4 Plus and HP5 Films? 
Steve Nicholls  7:29 23 Sep 09 
Re: xdf Files for PyroCat and Ilford FP4 Plus and HP5 Films? 
Bill Eisele  12:33 24 Sep 09 
TMX temperature control 
Nick Stanislo  14:21 8 Mar 09 
Re: TMX temperature control 
Ben Wilbur  9:08 9 Mar 09 
Re: TMX temperature control 
Steve Nicholls  5:31 15 Mar 09 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002