BTZS.org >> Forums home page
 
 Film & Paper Testing
 Film & Paper Testing Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 471 to 480 of 653 (Total: 653) First | Prev | Next | Last
Subject 
Author 
Date 
Re: Personal Reference Speed Point 
Phil Davis  9:10 20 May 04 
Re: Personal Reference Speed Point 
phil sweeney  8:58 23 May 04 
Re: Personal Reference Speed Point 
Phil Davis  12:54 23 May 04 
Re: Personal Reference Speed Point 
phil sweeney  3:11 24 May 04 
Re: Personal Reference Speed Point 
Phil Davis  6:30 24 May 04 
Re: Personal Reference Speed Point 
phil sweeney  6:15 26 Jun 04 
Re: Personal Reference Speed Point 
Phil Davis  7:37 26 Jun 04 
Chart / 100TMax HC-100 1+14 
Michael Andersen  8:02 17 May 04 
In the program there is a film as above. Is this mean from straight HC110 or HC-110 Stock. I did my test with Stock then going to 1+14 which is 1+23 from Concentrate. The developing times were only 1 min longer and I also used 68deg. ver. 70deg. I had guessed before this and found that my proper proofs were coming out very good at 8 mins.
My test show 8.25 mins for proper development.
But again my main questions has to do with the above combination.
thanks mike
 
Re: Chart / 100TMax HC-100 1+14 
Phil Davis  18:00 17 May 04 
Re: Chart / 100TMax HC-100 1+14 
Michael Andersen  18:45 18 May 04 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002