BTZS.org >> Forums home page
 
 Practical BTZS
 The BTZS System in Practice

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 351 to 360 of 387 (Total: 387) First | Prev | Next | Last
Subject 
Author 
Date 
Re: Minimum printing exposure and BTZS 
David Mark  9:12 15 Jan 03 
Re: Minimum printing exposure and BTZS 
Phil  12:26 15 Jan 03 
Re: Minimum printing exposure and BTZS 
David Mark  8:05 16 Jan 03 
Re: Minimum printing exposure and BTZS 
Phil  9:01 16 Jan 03 
Workaround for low light levels? 
Michael Mutmansky  8:58 13 Jan 03 
Re: Workaround for low light levels? 
Phil  12:26 13 Jan 03 
Re: Workaround for low light levels? 
Michael Mutmansky  9:43 15 Jan 03 
Thanks Phil,

When I talk about flash, I'm thinking about using flash as a supplemental source for a general scene. So, my exposure is somewhat determined by the ambient light, whch sets the time.

I'll check the new version of Expodev that I downloaded back in November, but I thought it does not permit going into negative EV values. (I thought I had tried it, but maybe I'm remembering the older version).

---Michael
 
exposure question 
howard schwartz  7:39 12 Jan 03 
Re: exposure question 
Phil  9:03 12 Jan 03 
flare compensation factors 
David Mark  13:46 10 Jan 03 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002