BTZS.org >> Forums home page
 
 Film & Paper Testing
 Film & Paper Testing Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 611 to 620 of 653 (Total: 653) First | Prev | Next | Last
Subject 
Author 
Date 
Paper Testing 
Larry Francis  17:06 8 Oct 02 
Re: Paper Testing 
Phil   11:23 9 Oct 02 
Personal refence speed 
Hans Lundberg  4:01 6 Oct 02 
Re: Personal refence speed 
Phil   9:48 6 Oct 02 
film testing 
howard schwartz  21:02 4 Oct 02 
Re: film testing 
Phil   8:46 5 Oct 02 
Re: film testing 
David Rude  23:18 6 Oct 02 
film testing 
howard schwartz  19:04 2 Oct 02 
phil,
1. i ran a film/developer test with tmax 400, ddx 1:6, 70 degrees, btz tubes. the five curves i plotted were great! the speed point was above 2.7, and i can live with that i think. my average g's are: 0.30, 0.39, 0.48, 0.59, 0.71. here is the problem. the plotter program does not generate any charts for "dev time/sbr", "dev time/g", "dev time/n".
why is that? the data added to my palm pilot produces a smooth g bar graph, and seems fine.
2. just as an aside, i really don't feel like redoing the test to adjust the speed point (2.7-2.4=0.3==>one stop less exposure). is this okay? also, is this related to #1 above? i don't think so.

thanks
 
Re: film testing 
Phil   20:23 2 Oct 02 
Re: film testing 
Phil   19:51 3 Oct 02 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002