BTZS.org >> Forums home page
 
 Film & Paper Testing
 Film & Paper Testing Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 631 to 640 of 653 (Total: 653) First | Prev | Next | Last
Subject 
Author 
Date 
Re: personal speed point 
Phil Davis  9:30 30 Sep 02 
Choosing alternative developing times for a film test 
David B. Mark  15:14 29 Sep 02 
Re: Choosing alternative developing times for a film test 
Phil Davis  17:46 29 Sep 02 
personal speed point 
howard schwartz  13:42 29 Sep 02 
Re: personal speed point 
Phil Davis  17:29 29 Sep 02 
Determining EFS for low contrast film-developer combinations 
David B. Mark  8:45 27 Sep 02 
Re: Determining EFS for low contrast film-developer combinations 
Phil Davis  11:32 27 Sep 02 
David --

You've raised a good issue. Although the Plotter can't establish a reference "ISO" speed point without considering curves that straddle the 0.62 gradient, it can mark the speed points on the individual curves. Of course they're meaningless without the ISO reference.

We can get around that by "calibrating" the test conditions to establish 2.4 (or some other specific) step tablet density (on the x-axis) as a generic ISO reference. Once that's been done it can be used to assign _relative_ EFS values to the speed points on the individual curves.
 
Re: Determining EFS for low contrast film-developer combinations 
David B. Mark  14:46 29 Sep 02 
Re: Determining EFS for low contrast film-developer combinations 
Phil Davis  17:26 29 Sep 02 
Demo version of WinPlotter 
Phil Davis  20:11 23 Sep 02 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002