BTZS.org >> Forums home page
 
 General Discussions
 General Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 111 to 120 of 316 (Total: 316) First | Prev | Next | Last
Subject 
Author 
Date 
IDmin Values Low 
Bob  19:04 16 Mar 06 
Re: IDmin Values Low 
Phil Davis  19:22 16 Mar 06 
Re: IDmin Values Low 
Bob  4:35 19 Mar 06 
Re: IDmin Values Low 
Phil Davis  17:08 19 Mar 06 
Re: IDmin Values Low 
Bob  13:21 22 Mar 06 
Started using the BTZS 
Bulent Ozgoren  5:38 13 Mar 06 
Re: Started using the BTZS 
Phil Davis  8:57 13 Mar 06 
Starting my BTZS tests 
Fred Braakman  15:08 5 Feb 06 
Re: Starting my BTZS tests 
Phil Davis  9:05 6 Feb 06 
Fred --

Good questions. Contact printing eliminates both possible fog from stray light in the darkroom, and the flare and diffusion effects of the enlarger's optical system. That's the test method to use if you want to correlate your data with the manufacturer's numbers—or if you plan to print by contact. But because you plan to print by projection you'll want any fog, flare, or diffusion, that will affect your prints, to be included in your test numbers.

So you should test by projection, and magnification is not important. I'd suggest making your test images life-size (4x5) to save paper but larger images are OK, too. I hope you'll enjoy BTZS.
 
Re: Starting my BTZS tests 
Fred Braakman  18:09 6 Feb 06 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002