BTZS.org >> Forums home page
 
 Film & Paper Testing
 Film & Paper Testing Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 361 to 370 of 653 (Total: 653) First | Prev | Next | Last
Subject 
Author 
Date 
Re: Negative densities 
Steve Nicholls  0:02 16 Nov 05 
Normal SBR of 8.0 = dev time of... 
Larry Francis  8:54 12 Oct 05 
Re: Normal SBR of 8.0 = dev time of... 
Phil Davis  16:39 12 Oct 05 
Re: Normal SBR of 8.0 = dev time of... 
Larry Francis  6:13 13 Oct 05 
Re: Normal SBR of 8.0 = dev time of... 
Phil Davis  6:52 13 Oct 05 
Testing same film type in different sizes 
John Hannon  17:30 8 Oct 05 
Re: Testing same film type in different sizes 
Phil Davis  11:11 9 Oct 05 
Re: Testing same film type in different sizes 
John Hannon  13:43 9 Oct 05 
Reciprocity Groups.  
Jorge Gasteazoro  16:36 22 Sep 05 
Re: Reciprocity Groups.  
Phil Davis  17:57 22 Sep 05 
Jorge --

The letter component describes exposure compensation; "A" providing the least, and "E" the most. The number component describes development compensation; "5" leaves development unchanged, "6" decreases development a little, "7" decreases it more. "4" increases development, "3" and "2" increase it more, and "1" increases it most.

"D" would be a logical next step; "E" might be a bit much. If the negative contrast was OK leave the number alone.
 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002