BTZS.org >> Forums home page
 
 Film & Paper Testing
 Film & Paper Testing Discussions

Announcements | General Discussions | Plotter | ExpoDev Palm | Film & Paper Testing | Practical BTZS | ExpoDev for iOS



 
Messages 101 to 110 of 653 (Total: 653) First | Prev | Next | Last
Subject 
Author 
Date 
Re: light for test 
Fred Newman  15:28 12 Nov 07 
Stand film developing 
Pat Krentz  20:53 1 Sep 07 
Re: Stand film developing 
Jorge Gasteazoro.   21:13 1 Sep 07 
Re: Stand film developing 
Jorge Gasteazoro.   11:55 3 Sep 07 
Re: Stand film developing 
Miles  18:50 5 Sep 07 
I use semi-stand development with BTZS almost exclusively for the past 5 months. My favorite is Tmax 100 in either pyrocat-mc or prescysol-ef and Tmax 400 in the same. I actually got my curves for Tmax 400 from Sandy King and they work perfectly and maade my Tmax 100 curves myself and the results are quite good... what you get is signiganly greater accutance,minimal grain, and a bit smoother tonality...I think its well worth the efford....Because of the longer processing time there also is a bit of serendipitous accuracy built in to the process(less critical times)...I haven't made curves for FP4 but(being a bit lazy) I used my Tmax100 times and the negatives were 1/3 step more exposed and a delight to print...I'll get around to doing the test but right now I just don't feel pushed....
 
Re: Stand film developing 
Jorge Gasteazoro.   23:30 5 Sep 07 
Re: Stand film developing 
Miles Nelson  11:23 6 Sep 07 
Re: Stand film developing 
Miles Nelson  2:50 11 Sep 07 
Re: Stand film developing 
Les Clark  17:38 8 Oct 07 
Paper Testing 
Pat Krentz  14:35 25 Aug 07 


BTZS.org >> Forums home page
 
 Note: The BTZS.org forums are now in read-only mode Last Updated: 22 Aug 2002